Mitsubishi Fuso Starts Production of eCanter Electric Truck
www.chinatrucks.com: Yesterday, Mitsubishi Fuso Truck and Bus Corporation (MFTBC) celebrated the start of production of the world’ first all‑electric light-duty truck, the Fuso eCanter. Fuso is a brand of Daimler Trucks Asia. The event was held at the production plant in Tramagal, Portugal, where all eCanter for the European and U.S. markets will be produced in line with the conventional Fuso Canter truck.

The Portuguese government has been supporting the development of the eCanter since the early stages in 2010. The President of the Portuguese Republic, Marcelo Rebelo de Sousa, joined members of the government, Mitsubishi Fuso Truck Europe and MFTBC executives at the event.
Marc Llistosella, President and CEO of Mitsubishi Fuso Truck and Bus Corporation and Head of Daimler Trucks Asia said at the occasion: “With today’s start of production of the eCanter, we become the first global manufacturer to produce an all-electric truck in series. From now on we can address the growing demand for locally emission free delivery trucks in Mega-Cities. We already received the first customer orders and will mark the global launch of this truck in one of the most iconic Mega-Cities, in New York, this September. Our Portuguese plant does not only produce the trucks for Europe and the US, we also benefit from a close cooperation with the authorities in Portugal and Lisbon testing the trucks there since 2014.”
Fully electric trucks in customer hands
In May, MFTBC already announced its first commercial customer in the Japanese market: Seven-Eleven Co., Ltd. will be operating 25 units of the new eCanter in their fleet within this year.
After unveiling the first charging station for trucks in May and starting production at the Kawasaki plant in Japan on July 7th, today’s event symbolizes the beginning of manufacturing of the eCanter outside of Japan. With these milestones MFTBC begins paving the way for the company’s first 100 percent electric commercial vehicle. After entering small scale series production, it will just be the natural next step to start with large scale series production in the future. The experiences from this small series in customer hands will also help Fuso for the large scale production in the coming year.
The Fuso eCanter is produced in line with the conventional Canter light-duty truck at the Tramagal plant. Only the electric-powertrain specific components will be installed in specific boxes along the production line. The vehicles coming from Tramagal, Portugal will be handed over to customers within Europe and the US within the next month.
The eCanter at a glance
The all-electric light-duty truck is Fuso’s answer to the public’s need for a zero-emission and zero-noise truck for inner-city distribution. It helps to solve the increasing noise and pollution problems in urban environments across the globe. In addition to being an environment-friendly vehicle, it is also cost‑e fficient and economical for users. The eCanter has a range of 100 kilometers and a load capacity of two to three tons – depending on body and usage. The vehicle’s electric powertrain contains six high voltage lithium ion battery packs with 420 V and 13.8 kWh each.
The battery packs are being delivered from the 100 percent Daimler subsidiary Accumotive in Kamenz, Germany.
The Fuso eCanter benefits from extensive experience of customer trials conducted in Portugal and Germany with the pre-series between 2014 and 2017. In comparison with a conventional diesel truck, it offers savings up to 1,000 Euro per 10,000 kilometers on operating costs.
Fuso has a long history in alternative drivetrains for trucks. Series production of the Canter Eco Hybrid began in 2006, while the second generation has been in production since 2012.
At the 2010 IAA Fuso already presented a first prototype of an electrically powered Canter E-Cell, leading into a pre-series production for testing purposes in 2014. An outlook on the Fuso eCanter small series celebrated its world premiere at the IAA in 2016 and the commercialized series-production eCanter will be globally launched in New York in September of this year.
Tramagal – a plant with a wealth of experience
The Tramagal plant in Portugal, around 150 kilometers north-east of Lisbon, has a long and varied history. It was founded in 1964 as a joint venture of the Portuguese family-run business Duarte Ferreira and the former French truck manufacturer Berliet. In 1980, the plant began with CKD (completely knocked down) assembly for Mitsubishi Fuso. In the following years the company assembled the Fuso Canter light‑duty truck and other Mitsubishi Fuso vehicles for the Portuguese market. Ten years later, the plant was purchased by Mitsubishi Motors Portugal. In 1996, Mitsubishi Motors Corporation took over the plant as the central production location for the Fuso Canter for Western Europe. The plant became part of Daimler AG in 2003 after the automaker acquired the majority share of Mitsubishi Fuso.
The plant covers a surface of 160,000 square meters. More than 400 employees produce Fuso Canter for around 30 European countries, Israel, Morocco and Turkey. Almost 95 percent of the vehicles are exported. Since 2012, the Tramagal employees also produce the Fuso Canter Eco Hybrid, the hybrid version of the Canter.
- Daimler Unveils Two Heavy-duty Electric Trucks in Race with Tesla 2018-06-08
- Daimler Brings New Garbage Truck to North America Market 2018-04-27
- Daimler Takes the Latest Trucks Actros and Arocs to Middle East and Africa 2018-03-09
- Daimler India Starts Production of Mini Truck for Exports 2018-02-28
- Geely Likely to Purchase a Below 3% Stake in Daimler 2018-02-07
- Daimler India Posted 28% growth in 2017 with 16717 units 2018-02-06
- Daimler to End the Full Year with Unit Sales in the Magnitude of 465,000 Trucks 2018-01-02
- Daimler Adapts as Mexico's Demand for Cabover Engine Truck Growing 2017-12-08
- Daimler Brings Two New Cabover Tractors to Mexican Market 2017-11-22
- Daimler Presents Its Mercedes-Benz Urban eTruck Before Tesla's Truck Event 2017-11-15
Submit Your Requirements, We Are Always At Your Service.
- Next Generation of Hino 500 Series to Arrive in Australia
- Foton Motor Involved in Cave Rescue Mission in Chiang Rai, Thailand
- 60.218 Billion! XCMG Ranks the First among “China’s 500 Most Valuable Brands
- JMC Looks to Boost Aussie Dealer Network
- India’s First Lithium-ion Battery Project Set to Get Underway
- Volvo Group Upbeat on Chinese Market
- XCMG Turkey Co., Ltd. and Spare Parts Center Opened in Ankara
- XCMG E-commerce Platforms Revolutionize the Supply Chain and Industrial Ecology
- Shacman Initial Sales in Jamaica Outperform Expectations
- Volvo Pushes Forward With Electric Trucks
- SAIC Hongyan Sold Over 40,000 Units Trucks from January to July
- Jiefang Heavy-duty Truck Sales Volume Reached 165,000 Units in H1 2018
- China's Commercial Vehicle Sales Reached 399,500 Units in June
- Truck Sales Exceeds Two Million Units in H1 2018
- JAC Hit Record High of 110,000 Units in Light-duty Truck Sales in H1,2018
- FAW Jiefang’s Medium-and Heavy-duty Truck Enjoys 20.9% YOY Growth in June
- Best-Selling Pickup Trucks in China--May 2018
- SAIC Hongyan Sold 559,800 Units Heavy-duty Trucks in January-May
- China Truck Makers Saw Strong Sales in May
- China Sold 162,414 Units Light Trucks in November