FAW CA3250P1K2T1


Product Description
Engine
|
Model
|
CA6DF1-26
|
CA6DF2-26
|
CA6DF1-24
|
CA6DF2-24
|
|
Type
|
6-cylinder in line, 4-stroke, water-cooled, direct injection, turbocharged, air-to-air intercooled
|
|
Rated Power
|
192kW (260hp) @ 2300rpm
|
177kW (240hp) @ 2300rpm
|
|
Max. Torque
|
930N.m @ 1400rpm
|
890N.m @ 1400rpm
|
|
Bore & Stroke
|
110×125mm
|
|
Displacement
|
7.127L
|
|
Compression Ratio
|
17
|
|
Specific Fuel Consumption
|
205g/(kW.h)
|
|
Emission Rating
|
Euro-1
|
Euro-2
|
Euro-1
|
Euro-2
|
|
Air Compressor
|
380L/min @ 2300rpm
|
|
Lube Oil System
|
Full flow oil filter, centrifugal oil filter, turbocharger oil filter
|
| Starting System |
Starter: 24V 6kW Alternator: 28V 1.5kW, with built-in regulator Cold starting aid: grid-type pre-heater
|
|
Air Intake System
|
Dual paper element air filter with air restriction indicator
|
|
Fuel Supply System
|
One frame-mounted primary fuel filter and two engine-mounted secondary fuel filters
|
|
Fuel Tank Capacity
|
200L
|
|
Exhaust System
|
Horizontal muffler with flexible pipe
|
|
Cooling System
|
Radiator: tube-type aluminum radiator with coolant recovery tank Fan: Lightweight plastic with viscous type drive
|
Clutch --Dry single Φ430mm plate --Diaphragm spring --Hydraulic control with air assist --Non-asbestos composite friction material
Transmission --Shanxi Fuller 8JS118 mechanical transmission with auxiliary case, 8 forward speeds and 1 reverse --Ratios: 1st 11.40, 2nd 7.94, 3rd 5.63, 4th 4.06, 5th 2.81, 6th 1.96, 7th 1.39, 8th 1.00, Rev. 11.35
Front axle --Drop forged "I" beam, rear mounted tie rod --Rated axle capacity: 7000 kg --Integral power steering, tilt and telescopic steering column --Suspension: Semi-elliptic multi-leaf springs with Φ50mm telescopic double acting shock absorbers --7.50V-20 steel disc wheels and 11.00-20-16PR tires (Single, bias tube-type)
Rear axle --Ф457 cast axle, 5.833 ratio (6.333 optional), full-floating --Rated axle capacity: 23000 kg --Suspension: Balance spring, semi-elliptic multi-leaf --7.50V-20 steel disc wheels and 11.00-20-16PR tires (Dual, bias tube-type)
Brake --Front and rear dual-circuit independent air brake system with air dryer --Reservoirs: Two 45L steel reservoirs --Service brakes: Air actuated, drum type, brake drum inner diameter: 400mm --Brake shoe width: Front 135mm, rear 200mm --Parking brake: Pneumatically controlled spring brakes, operated by manually actuated valve in conjunction with quick release valve, acting on rear wheels --Exhaust brake: Electrically controlled, pneumatically activated butterfly valve in exhaust pipe Frame --Ladder type, channel section side rails --Cross section dimensions: 280×90×8mm (with 5mm inner reinforcement) --Assembled width: 865mm in the front and rear
Cab --Model FM all steel welded COE (cab over engine) design, fully insulated mounting, 44 degree tilt with torsion bar assistance and safety latch --Cab glass: Laminated windshield and tempered side & rear windows --Windshield wipers: 3-blade, electric-driven, 2 speed & intermittent --Driver seat: Height, position & seat back angle adjustable with helical suspension, cloth with head rest --Passenger seat: Back angle adjustable with helical spring, cloth with high back --Seat Belts: Driver & passenger, 3-point type --AM/FM stereo radio with cassette --Meters & Gauges: Speedometer, tachometer, coolant temperature gauge, air pressure gauge --Warning Lights & Buzzers: Cab lock warning light & buzzer; Low coolant level warning light & buzzer;Low oil pressure warning light & buzzer; Low air pressure warning light & buzzer; Parking brake indicator light
Body --Dump - fully welded, latching tailgate, integral splash guards, cab shield
Electrical system --24 Volt, negative ground system --Battery: 6-QAW-180D, capacity: 2×180A.h --Combination halogen headlamps/marker lamps --Combination stop, tail and back-up lamps with reflector
Weights (kg) --Curb weight: 12100 --Front axle curb weight: 4290 --Rear dual axle curb weight: 7810 --Load capacity: 15000
Dimensions (mm) --Overall dimensions (length × width × height): 7490×2490×2730 --Body inner dimensions (length × width × height): 5000×2300×1200 --Track (front/rear): 1914/1847 --Wheelbase: 3500+1350 --Front overhang: 1255 --Back of cab to tandem axle center: 3400 --Rear axle center to end of frame: 900
Performance --Top speed: 78km/h (5.833 ratio) / 72km/h (6.333 ratio) --Fuel consumption at 60km/h with full load: 27L/100km --Min. turning radius: 8.5m --Max. outside noise level under acceleration: 84dB(A) --Min. ground clearance: 245mm
|
|