Engine
|
Model
|
CA6DF1-24
|
CA6DF2-24
|
CA6DF1-26
|
CA6DF2-26
|
|
Type
|
6-cylinder in line, 4-stroke, water-cooled, direct injection, turbocharged, air-to-air intercooled
|
|
Rated Power
|
177kW (240hp) @ 2300rpm
|
192kW (260hp) @ 2300rpm
|
|
Max. Torque
|
890N.m @ 1400rpm
|
930N.m @ 1400rpm
|
|
Bore & Stroke
|
110×125mm
|
|
Displacement
|
7.127L
|
|
Compression Ratio
|
17
|
|
Specific Fuel Consumption
|
205g/(kW.h)
|
|
Emission Rating
|
Euro-1
|
Euro-2
|
Euro-1
|
Euro-2
|
|
Air Compressor
|
380L/min @ 2300rpm
|
|
Lube Oil System
|
Full flow oil filter, centrifugal oil filter, turbocharger oil filter
|
|
Starting System
|
Starter: 24V 6kW Alternator: 28V 1.5kW, with built-in regulator Cold starting aid: grid-type pre-heater
|
|
Air Intake System
|
Dual paper element air filter with air restriction indicator
|
|
Fuel Supply System
|
One frame-mounted primary fuel filter and two engine-mounted secondary fuel filters Fuel Tank Capacity: 2×200L.
|
|
Exhaust System
|
Horizontal muffler with flexible pipe
|
|
Cooling System
|
Radiator: tube-type aluminum radiator with coolant recovery tank Fan: Lightweight plastic with viscous type drive
|
Clutch
--Dry single Φ430mm plate
--Diaphragm spring
--Hydraulic control with air assist
--Non-asbestos composite friction material
Transmission
--FAW CA7T156 mechanical transmission, 7 forward speeds and 1 reverse
--Ratios: 1st 9.058, 2nd 6.667, 3rd 3.781, 4th 2.242, 5th 1.413, 6th 1.000, 7th 0.820,
Rev. 8.082
Front axle
--Drop forged "I" beam, rear mounted tie rod
--Rated axle capacity: 6000 kg
--Integral power steering, tilt and telescopic steering column
--Suspension: Semi-elliptic multi-leaf springs with Φ50mm telescopic double acting shock
absorbers
--7.50V-20 steel disc wheels and 10.00-20-16PR tires (Single, bias tube-type)
Rear axle
--Ф457 cast axle, 5.833 ratio, full-floating
--Rated axle capacity: 23000 kg
--Suspension: Balance spring, semi-elliptic multi-leaf
--7.50V-20 steel disc wheels and 10.00-20-16PR tires (Dual, bias tube-type)
Brake
--Front and rear dual-circuit independent air brake system with air dryer
--Reservoirs: Two 45L steel reservoirs and one 30L steel reservoir
--Service brakes: Air actuated, drum type, brake drum inner diameter: 400mm
--Brake shoe width: Front 135mm, rear 200mm
--Parking brake: Pneumatically controlled spring brakes, operated by manually actuated
valve in conjunction with quick release valve, acting on rear wheels
--Exhaust brake: Electrically controlled, pneumatically activated butterfly valve in exhaust pipe
Frame
--Ladder type, channel section side rails
--Cross section dimensions: 280×90×8mm(with 5mm inner reinforcement)
--Assembled width: 865mm in the front and rear
Cab
--Model FM all steel welded COE (cab over engine) design, fully insulated mounting
--44 degree tilt with torsion bar assistance and safety latch
--Cab glass: Laminated windshield and tempered side & rear windows
--Windshield wipers: 3-blade, electric-driven, 2 speed & intermittent
--Driver seat: Height, position & seat back angle adjustable with helical suspension, cloth with
head rest
--Passenger seat: Back angle adjustable with helical spring, cloth with high back
--Seat Belts: Driver & passenger, 3-point type
--AM/FM stereo radio with cassette
--Meters & Gauges: Speedometer, tachometer, coolant temperature gauge, air pressure gauge
--Warning Lights & Buzzers: Cab lock warning light & buzzer; Low coolant level warning
light & buzzer; Low oil pressure warning light & buzzer; Low air pressure warning
light & buzzer; Parking brake indicator light
Electrical system
--24 Volt, negative ground system
--Battery: 6-QAW-120D, capacity: 2×120A.h
--Combination halogen headlamps/marker lamps
--Combination stop, tail and back-up lamps with reflector
Weights (kg)
--Curb weight: 9980
--Front axle curb weight: 3490
--Rear dual axle curb weight: 6490
--Load capacity: 15000
Dimensions (mm)
--Overall dimensions (length × width × height): 10030×2490×2850
--Body inner dimensions (length × width × height): 7600×2300×800
--Track (front/rear): 1914/1847
--Wheelbase: 4725+1350
--Front overhang: 1255
--Back of cab to tandem axle center: 5300
--Rear axle center to end of frame: 2460
Performance
--Top speed: 92km/h
--Fuel consumption at 80km/h with full load: 25L/100km
--Min. turning radius: 10.2m
--Max. outside noise level under acceleration: 84dB(A)
--Min. ground clearance: 245mm